Missing your admit card means missing the exam — no exceptions. This guide walks you through everything you need to know: the direct download link, step-by-step instructions, important exam dates, eligibility criteria, document symbols, and the key requirements you must not overlook on exam day.

Whether you’re a first-time INI CET candidate or a repeat aspirant, read this guide fully before heading to the exam centre.

Table of Contents

1. What is INICET / INI CET?
2. INICET 2026 May – Important Dates at a Glance
3. Eligibility Criteria for INICET May 2026
4. INICET 2026 Admit Card – Direct Download Link
5. How to Download AIIMS INI CET May 2026 Admit Card (Step-by-Step)
6. What’s Printed on Your Admit Card – Symbols & Details Explained
7. Documents Required on Exam Day
8. Exam Day Instructions & Best Practices
9. Common Mistakes to Avoid
10. What to Do If You Face Issues with the Admit Card
11. INICET 2026 Exam Preparation Tips
12. Key Takeaways
13. Frequently Asked Questions (FAQs)

 What is INICET / INI CET?

The INI CET (Institute of National Importance Combined Entrance Test) is a national-level postgraduate medical entrance examination conducted by AIIMS, New Delhi. It is held twice a year — in January and May — and serves as the gateway for admission to MD, MS, MDS, M.Ch. (6-year), DM (6-year), and PhD programs at premier Institutes of National Importance, including:

 INICET 2026 May – Important Dates at a Glance

Staying on top of dates is critical. Here is a consolidated schedule for the INICET May 2026 session:

Note: Always verify the exact dates on the official AIIMS INI CET portal at aiimsexams.ac.in, as they are subject to official revisions.

 Eligibility Criteria for INICET May 2026

Before downloading your admit card, confirm you meet the eligibility requirements. Candidates whose applications were accepted have already been screened — but knowing the criteria helps you stay informed.

Academic Qualification

• MBBS degree from a recognised medical college (MCI/NMC recognised)
• Completion of one year of compulsory rotating internship on or before the date of joining (not necessarily before the exam)
• For MDS: BDS degree with completed internship
• For PhD: Relevant postgraduate medical degree

Nationality

• Indian nationals, NRI/OCI candidates (subject to institute-specific rules)

Age Limit

• No upper age bar for most programs under INI CET

Attempts

• INI CET does not impose a restriction on the number of attempts

Registration Status

• Only candidates who successfully submitted the application form and paid the fee within the stipulated window are eligible to receive an admit card

 INICET 2026 Admit Card – Direct Download Link

The admit card has been released on the official AIIMS examination portal.

🔗 Official Download Portal: https://aiimsexams.ac.in

Navigate to:
“Academics” → “PG (MD/MS) Courses” → “INI CET May 2026” → “Admit Card”

You will need your registered email ID / application number and date of birth / password to log in.

 How to Download AIIMS INI CET May 2026 Admit Card (Step-by-Step)

Follow these steps carefully to download your hall ticket without issues:

Step 1: Open your browser and go to the official website — aiimsexams.ac.in

Step 2: On the homepage, look for the latest notification or direct link for “INI CET May 2026 Admit Card” (usually highlighted as a blinking link or under the “What’s New” section)

Step 3: Click the admit card link — it will redirect you to the candidate login page

Step 4: Enter your Application Number / Registered Email ID

Step 5: Enter your Date of Birth or Password (as set during registration)

Step 6: Complete the CAPTCHA verification and click Login

Step 7: Your admit card will appear on-screen. Click “Download Admit Card” or “Print Admit Card”

Step 8: Save the PDF and take at least 2–3 colour printouts on A4 paper

Step 9: Verify all the details mentioned on the admit card carefully (see Section 6 below)

Pro Tip: Use Google Chrome or Mozilla Firefox for the best compatibility with the AIIMS portal. Clear your browser cache if the page doesn’t load.

 What’s Printed on Your Admit Card – Symbols & Details Explained

Your INICET 2026 Admit Card is more than just a permission slip. It contains critical information you must verify before exam day.

Key Details Printed on the Hall Ticket

• Candidate’s Full Name (as registered)
• Application / Roll Number
• Photograph (uploaded during registration)
• Signature (uploaded during registration)
• Date of Birth
• Category (General / OBC / SC / ST / EWS / PwD)
• Exam Date and Reporting Time
• Exam Centre Name and Address
• Centre Code
• Subject/Programme Applied For (MD, MS, MDS, DM, M.Ch., PhD)
• Exam Timing (usually 9:00 AM – 12:00 PM for the morning session)
• Important Instructions (printed on reverse)

Understanding Symbols on the Admit Card

Important: If your photograph is unclear, your name is misspelled, or your exam centre is wrong — contact the AIIMS helpdesk immediately via the official grievance link on the portal. Do NOT attend the exam with incorrect details.

 Documents Required on Exam Day

Carrying your admit card alone is not enough. The following documents are mandatory at the exam centre:

Primary Documents (Mandatory):

• Printed INICET 2026 Admit Card (colour printout preferred)
• One valid government-issued photo ID — any one of:
  • Aadhaar Card
  • Passport
  • Voter ID Card
  • Driving Licence
  • PAN Card (with photograph)

Additional Documents (If Applicable):

• PwD certificate (for candidates with benchmark disability)
• Scribe undertaking form (if scribe is approved)
• Category certificate (OBC/SC/ST/EWS) — may be asked at some centres

Note: Digital/soft copies of ID proof are generally NOT accepted. Carry physical, original documents.

 Exam Day Instructions & Best Practices

Reporting Time

Candidates must report to the exam centre at least 60–90 minutes before the exam start time. Gates typically close 30 minutes before the exam begins. Late entry is not permitted.

Items Allowed Inside the Hall

• Admit card
• Valid photo ID
• Transparent water bottle
• Simple analogue wristwatch (no smart devices)

Items Strictly Prohibited

• Mobile phones, smartwatches, Bluetooth devices
• Electronic gadgets of any kind
• Books, notes, or printed material
• Calculators or scientific instruments
• Wallets with hidden compartments

Dress Code

There is no formal dress code, but avoid clothing with large metallic accessories (belts, excessive jewellery) as biometric frisking is conducted at most centres.

 Common Mistakes to Avoid

These are real errors that candidates have made in past INI CET sessions:

Mistake 1 – Printing in Black & White Only Some centres reject black-and-white printouts due to unclear photographs. Always print in colour.

Mistake 2 – Carrying the Admit Card Without an ID Proof Your admit card is invalid without a matching photo ID. Never leave home without both.

Mistake 3 – Reaching the Centre at the Last Minute Traffic, parking, or gate queues can cause delays. Aim to arrive 90 minutes early.

Mistake 4 – Not Verifying Centre Details in Advance Visit your exam centre location on Google Maps the day before. Some centres share names with nearby institutions — confirm the exact address.

Mistake 5 – Ignoring Errors on the Admit Card Candidates sometimes spot errors (wrong name, category, or photo) but assume it will be corrected at the centre. It won’t. Raise a grievance before exam day.

 What to Do If You Face Issues with the Admit Card

If you cannot download your admit card or find an error, take these steps:

1. Re-check your login credentials — use the “Forgot Password” option if needed
2. Visit the official AIIMS Help Desk: aiimsexams.ac.in → Contact Us / Grievance Section
3. Email AIIMS: The official examination helpdesk email is usually listed in the information bulletin
4. Call the helpline: Check the official notification for the current session’s helpline number
5. Act immediately — do not wait until the day before the exam

 INICET 2026 Exam Preparation Tips

With the admit card in hand, your focus must now shift entirely to final preparation. Here is what toppers consistently recommend:

Revise High-Yield Topics First Focus on subjects with the highest number of questions in past INI CET papers — Medicine, Surgery, Pathology, Pharmacology, and Anatomy are always heavily represented.

Practice with Previous Year Papers Solve at least 5–7 years of INI CET previous year question papers under timed conditions. This builds speed and familiarises you with the question pattern.

Use Subject-Specific High-Yield Notes Standard textbooks are too vast for last-minute revision. Rely on concise, high-yield notes — many toppers recommend subject-specific handwritten or printed summaries.

Mock Tests are Non-Negotiable Take full-length mock tests in exam-simulation conditions. Aim for at least one mock test every 2–3 days in the final two weeks.

Focus on Weak Areas, Not Just Strengths It’s tempting to revise what you already know well. Identify your weak subjects and allocate dedicated time to those.

Sleep and Nutrition Matter Do not compromise on sleep in the final week. A well-rested brain retains and recalls information significantly better than a sleep-deprived one.

Key Takeaways

• The INICET 2026 Admit Card for the May session is officially available on aiimsexams.ac.in
• Download it using your application number and date of birth / password
• Print colour copies and carry a valid government photo ID on exam day
• Check all details on the admit card — name, photo, centre, and category
• Report to the exam centre at least 60–90 minutes early
• No electronic devices are allowed inside the exam hall
• In case of errors or download issues, contact AIIMS through official channels immediately
• Use the remaining time for focused revision, mock tests, and adequate rest

Conclusion

The release of the INICET 2026 Admit Card marks the final countdown for one of India’s most competitive medical postgraduate entrance exams. Download your hall ticket without delay, verify every detail, and keep it safe along with your ID proof.

Preparation is already done — now it’s about execution. Stay calm, follow exam day instructions meticulously, and walk into the exam centre with confidence. AIIMS and the other INI institutions await the best and brightest. You’ve worked hard to get here — make it count.

Best of luck for INICET May 2026! 🩺

FAQs

Q1. When was the INICET 2026 May Admit Card released?
The INICET 2026 May session admit card has been released on the official AIIMS portal (aiimsexams.ac.in). The exact release date is notified via official announcements — candidates are advised to check the portal regularly or set up email alerts.

Q2. What is the official website to download the INI CET May 2026 Admit Card?
The official and only authentic website is aiimsexams.ac.in. Do not trust third-party websites claiming to provide admit card downloads, as these may be fraudulent.

Q3. What if I forget my application number for INICET 2026?
Use the “Forgot Application Number” or “Forgot Password” option on the login page. You will need your registered email ID or mobile number to recover your credentials.

Q4. Is the admit card sufficient on its own to enter the INICET exam centre?
No. You must carry both the printed admit card AND a valid original government-issued photo ID (Aadhaar, Passport, Voter ID, Driving Licence, or PAN Card). Without both, entry may be denied.

Q5. Can I appear for INICET 2026 if my MBBS internship isn’t completed yet?
Yes — many institutes allow you to appear in the exam even if the internship is ongoing, provided it will be completed before the date of joining/admission. However, check the specific rules in the official information bulletin, as this may vary by institute.

Q6. What should I do if there is an error in my INICET 2026 Admit Card?
Do not attend the exam with an erroneous admit card. Immediately contact the AIIMS examination helpdesk through the grievance portal on aiimsexams.ac.in and provide documentary evidence of the correct information.

Q7. How many copies of the INICET admit card should I print?
Print at least 2–3 copies in colour. Keep one for yourself (for future reference during counselling) and carry at least one to the exam centre. Some centres may collect one copy at entry.

Click here:

Tvasta, a Chennai-based startup founded by IIT Madras alumni in 2016, has been working at the intersection of robotics, automation and construction 3D printing. With Cedar, the company is now taking its technology to a global stage. The printer has been designed and manufactured in India and is being positioned for deployment across international markets, including the United States, Europe, the Middle East, Asia and Africa.

At a time when the global construction industry is looking for faster, more affordable and more sustainable building methods, Cedar aims to solve some of the biggest challenges faced by developers and contractors. These include high material costs, labour dependency, long project timelines, construction waste and limited access to scalable automation.

A Make in India Innovation for the World

Cedar is more than just a new construction machine. It is a strong example of Make in India moving from research and development into real-world global deployment. Tvasta’s journey began with the goal of using additive manufacturing to transform how buildings and infrastructure are created.

Cedar has been designed to address these barriers. By combining Indian engineering, AI-based material optimisation and a scalable printing platform, Tvasta and 14Trees are trying to make 3D concrete printing more practical for mainstream construction projects.

What Makes Cedar Different?

One of Cedar’s most important features is its portal-frame architecture. This structure makes the printer suitable for large construction sites and allows it to support projects across residential, commercial, industrial and infrastructure categories.

The printer can reach up to 10 metres in printing height and has an extendable footprint of up to 240 square metres. This gives construction companies the flexibility to use it for different types of projects, including homes, offices, technical facilities, industrial structures and infrastructure components.

Another major advantage is cost. Cedar offers printing volumes comparable to many existing large-format 3D construction printers, but at nearly half the capital investment. This is significant because high upfront cost has often been one of the biggest reasons construction companies hesitate to adopt 3D printing technology.

By reducing the entry barrier, Cedar can help more developers, contractors and public sector agencies explore automated construction.

Printing With Real Concrete

A major breakthrough in Cedar is its ability to print with real concrete instead of relying only on specialised mortar-based mixes. Many construction 3D printers depend on costly mortar materials, which can make projects expensive and limit the use of locally available resources.

Cedar is designed to work with standard concrete formulations. This can reduce material costs by up to 5x, making 3D concrete printing more affordable and practical for large-scale construction.

The ability to use real concrete also improves local adaptability. Construction projects across different countries and regions often depend on materials available nearby. By supporting locally sourced concrete formulations, Cedar can help reduce transportation costs, improve supply chain efficiency and lower the environmental impact of projects.

AI Companion for Smarter Construction

Cedar is not just a hardware platform. It is supported by the 14Trees AI Companion, a digital platform that helps optimise material performance using local resources. The AI Companion analyses thousands of mix designs to help construction teams balance cost, strength and environmental impact.

This is especially important in construction because project conditions vary widely from one region to another. Local materials, climate, humidity, temperature and structural needs can all affect the performance of concrete.

By using AI to recommend and optimise material mixes, Cedar can help contractors achieve more consistent results. It also supports better decision-making by giving teams data-driven insights before and during the construction process.

This combination of robotics and artificial intelligence gives Cedar a clear advantage in real-world deployment. It is not only designed to print structures, but also to help teams understand how to print them efficiently, safely and economically.

Built by Indian Engineering Talent

Tvasta was founded by IIT Madras alumni and has grown into one of India’s most notable startups in the construction 3D printing space. The company has worked on multiple 3D-printed building projects, including housing, educational facilities, offices and technical infrastructure.

The launch of Cedar shows how Indian deep-tech startups are moving beyond prototypes and pilot projects. They are now building industrial-grade solutions that can compete in global markets.

Tvasta CEO Adithya V S has described Cedar as a platform that brings together advanced manufacturing, robotics and software. The goal is to create a system that can perform reliably across different construction environments.

14Trees CEO Francois Perrot has also highlighted the economic side of the technology. According to him, construction 3D printing must not only be technically proven, but must also make financial sense for contractors and developers. Cedar has been designed with that requirement in mind.

Why Cedar Matters for the Construction Industry

The construction industry is under pressure to deliver projects faster, reduce costs and adopt greener methods. Traditional construction often involves long timelines, material wastage, labour shortages and inconsistent quality. Automation can help address many of these issues.

Cedar’s 3D printing technology can reduce construction time by automating repetitive building processes. It can also improve precision, reduce dependency on manual labour and lower material wastage by placing concrete only where needed.

For developers, this means faster project execution and potentially better cost control. For governments and public sector agencies, it could support faster delivery of housing, schools, community facilities and infrastructure. For emerging markets, it offers a more accessible route to advanced construction technology.

The use of AI for material optimisation also supports sustainability. By improving mix designs and reducing waste, Cedar can help construction firms lower their environmental footprint.

Taking Indian Deep-Tech Global

Cedar’s global deployment strategy is one of the most important parts of this launch. The printer is being positioned for markets across the United States, Europe, the Middle East, Asia and Africa.

This is a strong signal that Indian startups are no longer limited to solving domestic challenges. They are creating globally relevant technologies in areas such as robotics, automation, AI and advanced manufacturing.

For India, Cedar reflects the growing maturity of its deep-tech ecosystem. It also shows how institutions like IIT Madras are helping produce founders and engineers who can build globally competitive products.

The partnership between Tvasta and 14Trees brings together Indian engineering and international construction technology expertise. This can help accelerate adoption by offering end-to-end support, including design optimisation, materials development and on-site delivery.

The Future of Automated Construction

As the construction industry evolves, technologies like Cedar could become central to the future of building. Developers and contractors are increasingly looking for solutions that can improve speed, reduce costs and support sustainable development.

Cedar has the potential to serve as a platform for smarter construction. Its ability to print with real concrete, reduce material costs, support large structures and use AI-based optimisation makes it a practical solution for modern construction needs.

While construction 3D printing is still an emerging field, Cedar’s launch marks a significant step toward wider adoption. It brings together the key elements needed for scale: affordability, flexibility, AI support, material compatibility and global deployment readiness.

For Tvasta, this is a major milestone. For India, it is another example of homegrown innovation entering the global stage. For the construction industry, Cedar could become an important tool in the shift toward faster, greener and more automated building methods.

FAQs

1. What is Cedar by Tvasta and 14Trees?

Cedar is an AI-ready 3D concrete printer developed by Tvasta Manufacturing Solutions in partnership with 14Trees. It is designed for large-scale construction automation and global deployment.

2. Why is Cedar important for construction 3D printing?

Cedar reduces the cost barrier for construction 3D printing by offering large-format printing capabilities at lower capital investment. It can also print with real concrete, which helps reduce material costs.

3. What is the printing capacity of Cedar?

Cedar can reach up to 10 metres in printing height and has an extendable footprint of up to 240 square metres, making it suitable for residential, commercial, industrial and infrastructure projects.

4. How does AI help Cedar perform better?

Cedar is supported by the 14Trees AI Companion, which analyses thousands of concrete mix designs. It helps optimise cost, strength and environmental performance using locally available materials.

5. Why is Cedar considered a Make in India success story?

Cedar has been designed and manufactured in India by Tvasta, a startup founded by IIT Madras alumni. Its global deployment plans show how Indian deep-tech innovation can compete in international construction markets.